This website uses some cookies. If you continue navigation, you accept the use of cookies. Warning: blocking cookies prevents the proper operation of the site.

Guided search

Find your products

Kind of components to be machined ?

Which type of work is to be performed ?

What are the diameters/dimensions ?

What are the wall thicknesses to consider ?

Shall the equipment be driven?

Flange Diameter ?

Boring Depth?

Shall the machine be operated?

Search this site
Find a product
  • World Leading Machining Solutions

    Beveling - Pipe Facing - Orbital cutting - Counterboring - Surfacing - Boring
  • World Leading Machining Solutions

    Beveling - Pipe Facing - Orbital cutting - Counterboring - Surfacing - Boring
Read more

Counterboring

delarder.jpeg

Pipe counterboring consists of lightly machining the inside of a pipe for ensuring that the land is the same width over the whole circumference of the pipe end. As is also the case for the gap between two pipes, constant land width makes it easier to weld tubes or pipes together. This can be explained by pipe manufacturing tolerances that may give rise to varying land widths over the pipe’s circumference. PROTEM counterboring machines can be used for weld joint preparation on all materials such as mild steel, stainless steel and various alloys such as duplex, super duplex, inconel, austenite, copper etc.

  • US25CH - Tube and pipe beveling machine with pneumatic drive 730 W

    12.5 mm (0.49") ID
    120 mm (4.72") OD

  • US25CH-1020 - Tube and pipe beveling machine with electric drive 1050 W

    12.5 mm (0.49") ID
    120 mm (4.72") OD

  • US25TA - Machining Unit for Fin Tubes

    12.5 mm (0.49") ID
    120 mm (4.72") OD

  • US25TP - Tube and pipe beveling machine for heat exchanger tubes beveling Cut to Length Weld Removal

    25.4 mm (1.00") ID
    63.5 mm (2.50") OD

  • US25CA - Beveling machine with automatic clamping system

    12.5 mm (0.49") ID
    120 mm (4.72") OD

  • US30CH - ID mount beveler with pneumatic drive for boiler tubes

    32 mm (1.26") ID
    168.3 mm (6.63") OD

  • US30CH-E - ID mount tube beveler with electric drive 220V

    32 mm (1.26") ID
    168.3 mm (6.63") OD

  • US30HY - ID mount tube beveler with hydraulic drive ID locking beveling machine

    32 mm (1.26") ID
    168.3 mm (6.63") OD

  • US30CA - ID mount beveler with pneumatic drive with autom. clamping system

    32 mm (1.26") ID
    168.3 mm (6.63") OD

  • US30ACC - ID mount beveler with flange resurfacing module

    50 mm (1.97") ID
    355 mm (13.98") OD

  • US40 - Tube & Pipe Chamfering Machine with pneumatic drive ID locking beveling machine

    43 mm (1.69") ID
    273 mm (10.75") OD

  • US40-1020 - Tube & Pipe Chamfering Machine with electric drive

    43 mm (1.69") ID
    273 mm (10.75") OD

  • US40-1060 - Tube & Pipe Chamfering Machine with hydraulic drive

    43 mm (1.69") ID
    273 mm (10.75") OD

  • US40CA - Tube and pipe beveling machine with pneumatic drive with autom. clamping system

    43 mm (1.69") ID
    273 mm (10.75") OD

  • US80 - ID clamping beveler with pneumatic drive

    80 mm (3.15") ID
    406.4 mm (16.00") OD

  • US80HY - ID clamping beveler with hydraulic drive

    80 mm (3.15") ID
    406.4 mm (16.00") OD

  • US80E - ID clamping beveler with electric drive

    80 mm (3.15") ID
    406.4 mm (16.00") OD

  • US150 - Tube and pipe beveling machine with pneumatic drive

    150 mm (5.91") ID
    610 mm (24.02") OD

  • US150-1020 - Tube and pipe beveling machine with electric drive

    150 mm (5.91") ID
    610 mm (24.02") OD

  • US150-1060 - Tube and pipe beveling machine with hydraulic drive

    150 mm (5.91") ID
    610 mm (24.02") OD

  • US450 - Tube and pipe beveling machine with pneumatic drive

    457 mm (17.99") ID
    914 mm (35.98") OD

  • US450-1060 - Tube and pipe beveling machine with hydraulic drive

    457 mm (17.99") ID
    914 mm (35.98") OD

  • PFM-414 - Pipe Facing Machine PFM for Ø ranging from 4" to 14"

    101.6 mm (4.00") ID
    355.6 mm (14.00") OD

  • PFM-1222 - Pipe Facing Machine PFM for Ø ranging from 12" to 22"

    323.9 mm (12.75") ID
    558.8 mm (22.00") OD

  • PFM-1030 - Pipe Facing Machine PFM for Ø ranging from 10" to 30"

    273.1 mm (10.75") ID
    762 mm (30.00") OD

  • PFM-3038 - Pipe Facing Machine PFM for Ø ranging from 30" to 38"

    762 mm (30.00") ID
    965 mm (37.99") OD

  • PFM-3848 - Pipe Facing Machine PFM for Ø ranging from 34" to 48"

    965 mm (37.99") ID
    1219.2 mm (48.00") OD

  • PFM-4656 - Pipe Facing Machine PFM for Ø ranging from 46" to 56"

    1168.4 mm (46.00") ID
    1422.4 mm (56.00") OD

  • PFM-5464 - High Speed Bevelers for pipes ranging from 54" to 64"

    1371.6 mm (54.00") ID
    1625.6 mm (64.00") OD

  • PFM-6272 - Pipe Facing Machine PFM for Ø ranging from 62" to 72"

    1574.8 mm (62.00") ID
    1828.8 mm (72.00") OD

  • BB-1-6 - High Speed Beveling Bench for pipes ranging from 1" to 6’’

    25.4 mm (1.00") ID
    168.3 mm (6.63") OD

  • BB-3-16 - Automatic Bench machine for pipes ranging from 3" to 16’’

    88.9 mm (3.50") ID
    406.4 mm (16.00") OD

  • BB-12-24 - High Speed Beveling Bench for pipes ranging from 12" to 24’’

    304 mm (11.97") ID
    609 mm (23.98") OD

  • BB-24-36 - Automatic Beveling Bench machine for pipes ranging from 24" to 36’’

    609 mm (23.98") ID
    914 mm (35.98") OD

  • BB-36-48 - High Speed Beveling Bench for pipes ranging from 36" to 48’’

    914 mm (35.98") ID
    1219 mm (47.99") OD

  • US600R - Pipe beveler for very heavy wall thicknesses

    600 mm (23.62") ID
    1500 mm (59.06") OD

  • O-HSB-C-6-14 - Beveling and surfacing unit for tubes of 6" to 14"

    152.4 mm (6.00") ID
    355.6 mm (14.00") OD

  • SE60 - Tube squaring and beveling machine with pneumatic drive 730 W

    10 mm (0.39") ID
    60.3 mm (2.37") OD

  • SE60-1020 - Tube squaring and beveling machine with electric drive 1050 W

    10 mm (0.39") ID
    60.3 mm (2.37") OD

  • SE90NG - Tube squaring and beveling machine with pneumatic drive

    10 mm (0.39") ID
    90 mm (3.54") OD

  • SE90NG-1020 - Tube squaring and beveling machine with electric drive 2800 W

    10 mm (0.39") ID
    90 mm (3.54") OD

  • SE120 - Tube squaring and beveling machine with pneumatic drive 730 W

    50 mm (1.97") ID
    120 mm (4.72") OD

  • SE120-1020 - Tube squaring and beveling machine with electric drive 1050 W

    50 mm (1.97") ID
    120 mm (4.72") OD

  • SE219 - Od mounted beveling machine with pneumatic drive

    60.3 mm (2.37") ID
    219.1 mm (8.63") OD

  • SE219-1020 - Od mounted beveling machine with electric drive 220 V

    60.3 mm (2.37") ID
    219.1 mm (8.63") OD

  • BMFM114 - Bevel, face and counterbore separately or in a simultaneous operation on tubes up to 4.5 inches

    20 mm (0.79") ID
    114.3 mm (4.50") OD

  • BMFM219 - Bench Mounted Facing Machine BMFM 219 machining unit with concentric clamping device for Ø from 1" to 8.626"

    25.4 mm (1.00") ID
    219.1 mm (8.63") OD

  • TTNG-HD168 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 2" to 6"

    60.3 mm (2.37") ID
    168.3 mm (6.63") OD

  • TTNG-HD219 - Clamshell Cutting & Beveling machine-Pipe Cold Cutting Machine for pipes ranging from 4" to 8"

    114.3 mm (4.50") ID
    219.1 mm (8.63") OD

  • TTNG-HD273 - Splitframe Orbital Tube Cutting & Beveling Clamshell for pipes ranging from 6" to 10"

    168.3 mm (6.63") ID
    273.1 mm (10.75") OD

  • TTNG-HD323 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 8" to 12"

    219.1 mm (8.63") ID
    323.9 mm (12.75") OD

  • TTNG-HD406 -Clamshell Cutting & Beveling machine-Pipe Cold Cutting Machine for pipes ranging from 10" to 16"

    273.1 mm (10.75") ID
    406.4 mm (16.00") OD

  • TTNG-HD508 - Splitframe Orbital Tube Cutting & Beveling Clamshell for pipes ranging from 12" to 20"

    323.9 mm (12.75") ID
    508 mm (20.00") OD

  • TTNG-HD610 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 16" to 24"

    406.4 mm (16.00") ID
    610 mm (24.02") OD

  • TTNG-HD762 - Clamshell Cutting & Beveling machine-Pipe Cold Cutting Machine for pipes ranging from 22" to 30"

    558.8 mm (22.00") ID
    762 mm (30.00") OD

  • TTNG-HD900 - Splitframe Orbital Tube Cutting & Beveling Clamshell for pipes ranging from 26" to 36"

    660.4 mm (26.00") ID
    914.4 mm (36.00") OD

  • TTNG-HD1016 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 32" to 40"

    812.8 mm (32.00") ID
    1016 mm (40.00") OD

  • TTNG-HD1200 - Clamshell Cutting & Beveling machine-Pipe Cold Cutting Machine for pipes ranging from 36" to 48"

    914.4 mm (36.00") ID
    1219.2 mm (48.00") OD

  • TTNG-HD1400 - Splitframe Orbital Tube Cutting & Beveling Clamshell for pipes ranging from 44" to 56"

    1117.6 mm (44.00") ID
    1422.4 mm (56.00") OD

  • TTNG-LW168 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 2" to 6"

    60.3 mm (2.37") ID
    168.3 mm (6.63") OD

  • TTNG-LW219 - Clamshell Cutting & Beveling machine-Pipe Cold Cutting Machine for pipes ranging from 4" to 8"

    114.3 mm (4.50") ID
    219.1 mm (8.63") OD

  • TTNG-LW273 - Splitframe Orbital Tube Cutting & Beveling Clamshell for pipes ranging from 6" à 10"

    168.3 mm (6.63") ID
    273.1 mm (10.75") OD

  • TTNG-LW323 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 8" à 12"

    219.1 mm (8.63") ID
    323.9 mm (12.75") OD

  • TTNG-LW406 - Orbital Pipe Cutting and Beveling Splitframe Clamshell for pipes ranging from 10" à 16"

    273.1 mm (10.75") ID
    406.4 mm (16.00") OD

  • TTNG-LW508 - Splitframe Orbital Tube Cutting & Beveling Clamshell for pipes ranging from 12" à 20"

    323.9 mm (12.75") ID
    508 mm (20.00") OD

  • TTNG-LW610 - Orbital Cutting & Beveling machine Splitframe Clamshell for pipes ranging from 16" à 24"

    406.4 mm (16.00") ID
    610 mm (24.02") OD

  • TNOFAB-4-12 - Heavy duty cutting and beveling machine

    114.3 mm (4.50") ID
    323.9 mm (12.75") OD

  • TNOFAB-12-24 - Heavy duty cutting and beveling machine

    323.9 mm (12.75") ID
    610 mm (24.02") OD

  • TNOFAB-24-36 - Heavy duty cutting and beveling machine

    610 mm (24.02") ID
    914.4 mm (36.00") OD

  • FBB1-3 - Elbow Bench Beveling Machine

    33.4 mm (1.31") ID
    88.9 mm (3.50") OD

  • FBB2-6 Elbow Bench Beveling Machine

    60.3 mm (2.37") ID
    168.3 mm (6.63") OD